AR filters are used to reduce glare and reflection. They improve the brightness of transmitted images or light beans to reach the final target of a minimum loss at visible wavelengths.

The Beam-Splitter is used to divide the light transmission and light refection at a specified wavelength. Customers are able to decide their required transmittance and reflectance at a certain wave band.

The black chrome thin-film has very stable chemical properties. The black chrome thin-film shades from the blaze and allows very low transmission and reflection of light.

Black coating contributes to a very low transmission on the visible light wavelengths, usually being used for glass gobos.

Kupo CMY color mixing wheels are manufactured with an innovative technology. The perfect CMY patterns provide maximum system efficiency and a full variety of colors for the application of intelligent lightings.

Cold mirros are designed to reflect visible light and allow near IR(heat energy) transmission.

Kupo color correction filters are used to change the color temperature of various light sources. They are commonly used in stage, entertainment, fashion , accenting lighting and as well as architectural lighting fixtures.

Dichroic filters transmit light of certain color and reflect the complementary color. They are very good heat resistant and mainly used in lighting applications.

Dielectric mirrors achieve higher reflection of visible light and have better heat resistance at an excellent stability.

Pattern glass windows can be used on lighting applications to create special and different lighting effects. They are also widely used for architectural purposes.

The hard coating reinforces the plastic lenses' resistance to scratches and increases the lifetime of the plastic lenses.

Honeycomb louvers are made of aluminum foils in the mesh of hexagon.They serve as a shield for illuminators and help reduce the glare.

Hot mirror contributes high IR reflection and blocks near UV energy. It's a very good solution to protect the optical or electronic components from damage by reflecting the heat back to the light source.

IR cut off filter transmits visible light and blocks IR light. It is often used in the applications with CCD/CMOS sensors to produce true color images and avoid the color deviation.

IR transmission filter transmits the IR energy and block the visible light. It can be used to replace the IR light source and helps the concealments when a night vision camera is set up.

Neutral density filters are used to reduce transmission and increase contrast. ND filters are often used in the applications of cameras and detectors.

Reflective mirrors RGB are designed for the reflection at some specific visible light wavelengths. The whole set of reflective mirror red/green/blue can be used in the projector system.

Reflective mirror red is designed to reflect light on the required wavelengths.
It is often applied to the use of bar-code readers.

The technique of R/G/B filter is a very common and efficient solution to produce various colors and keep the extreme permeability at the same time.

A UV blocking filter transmits much the visible light and reflects the undesired UV energy. It protects the UV sensitive materials and components from damage when the light output is intensified.

UV transmission filter is used for special applications that need to transmit the UV energy and reflect most visible light to achieve some specific effects.